|
Product Details:
Payment & Shipping Terms:
|
| Material: | PET / PETG | Type: | Shrink Film |
|---|---|---|---|
| Usage: | Packing Film | Industrial Use: | Label Printing |
| Hardness: | Soft | Sample: | Availble |
| High Light: | silicone coated film,plastic shrink film |
||
60 Mic Hgh Shrinkage And Soft PETG Shrink Film For Bottle Labeling
Product Details
PET / PETG shrink film is widely used in daily life. Compared with PVC shrink film, it is more eco-friendly and it has higher shrinkage. For these unique characteristics, many large companies switch to PETG shrink film. And at present, it has occupied the market to some extent.
Product Specifications
Thickness: 20-80mic
Width: 350-2000mm
Roll Diameter: 300-600mm
Paper Coil: 76mm(3") 152mm(6")
Shrinkage : 60%~78%
Product Parameter
| No | Test Item | UNIT | Standard | Test Result | Decide | |||
| 1 | (Average thickness deviation) | μm | ±3 | 0 | Qualified | |||
| 2 | TENSILE STRENGTH | (MD) | MPa | ≥42 | 65.8 | Qualified | ||
| (TD) | MPa | ≥142 | 231 | |||||
| 3 | ELONGATION | (MD) | % | ≥300 | 591 | Qualified | ||
| (TD) | % | ≥35 | 55 | |||||
| 4 | (Elasticity Modulus) | (MD) | MPa | ≥1500 | 3269 | Qualified | ||
| (TD) | MPa | ≥3000 | 7370 | |||||
| 5 | HEAT SHRINKAGE | (MD) | % | ≤5.0 | 2.3 | Qualified | ||
| (TD) | % | 60～70 | 66 | |||||
| 6 | (HAZE) | % | ≤7.0 | 2.2 | Qualified | |||
| 7 | C.O.F | (IN/OUT) | dynamic friction coefficient | / | ≤0.50 | 0.47 | Qualified | |
| 8 | WETTING TENSION | mN/m | ≥38 | ≥38 | Qualified | |||
| 9 | Density | g/cm3 | 1.32±0.3 | 1.46 | Qualified | |||
Advantages
1. High tensile strength
2. Good flatness and fit for wide printing
3. Perfect printing performance for shallow network printing
4. Even and high shrinkage and excellent thermal shrinking stability
5. Eco-friendly.
Application for PET / PETG Shrink Film
Advice
For storing and printing: the temperature should be below 30℃.
For printing: using printing ink exclusively used for PET
Our Services
FAQ:
1. - How to make an order?
- You can contact our salesman for an order.
You need give us your demands of the order as clear as possible. With the related PDF or Al design files you offer us, we can provide you the sample you require quickly. After your conformation and payment for them, we can go ahead with the mass production. we may talk about the details by Email or other useful way in case of any mistakes.
2. - What is the lead time?
- Sample needs about 7 days prepared; mass production time needs 15-25 days normally.
3. - Do you have any MOQ limit?
- Our MOQ is 1Tons.
4. - What information should I let you know if I want to get a quotation?
- The external size of your products (Thick x Width x Length) and the quantity.
Contact Person: Mrs. Alice
Tel: 86-15327161968
Fax: 86-027-83991169
